SJ Mepla Overview
SJ MEPLA is the technologically leading program for dimensioning and calculating the stress on
multi-layer glazing (plates). SJ MEPLA offers new approaches for stress calculation on laminated
glass, insulated glass and point-supported glass - and for investigating pendulum impact
and pressure shock.
The dimensioning and stress calculation of plate structures under widely varying conditions is a
standard task in routine engineering work. A special challenge is frequently presented by geometrical
configurations which deviate from a rectangular shape. They are no longer calculated using tables or
rules of thumb, but rather using the finite element method.
In the field of glass construction the systems to be investigated are usually restricted to a few basic shapes (triangular,
rectangular, ...) for which new meshes always have to be produced. With the calculation of laminated safety glass units
normally volume elements must be used.
The evaluation of the calculated results often occurs following the same pattern (deformations, stresses, verification)
and until now it always had to be gleaned from the FE data. And this is where SJ MEPLA comes in.
All the input regarding the geometry, types of support, types of loading, computational formulations and required
outputs are controlled and displayed using an input mask. The control and output of the results occurs visually via
a dedicated graphical interface and by using a computational log which can be enclosed with the structural statics calculation.
Particularly, new FE methods facilitate the simple input and fast computation of sandwich structures (laminated safety glass),
so that the normal problem situations can be solved in the shortest time (a few minutes).
SJ MEPLA is suitable for dimensioning and also for the structural statics computation.